What lens power should I start with?

4× is a common starting point for outdoor target; indoor and 3D shooters often go lower to keep the sight picture steady. If the float looks alarming, drop power rather than fight it.

Why is my pin blurry through the lens?

Your eye can't focus on the pin and the magnified target at once. A clarifier in the peep sharpens the pin; alternatively use a dot or ring reticle that reads clearly out of focus.

Does a scope replace a peep?

No — the peep stays as the rear reference and the scope is centred inside it. Match the housing diameter to the peep so the alignment is unambiguous.

Scope

In compound archery a scope is the round housing on a target sight that holds the aiming reference — a pin, a dot, a ring or a lens — and usually a magnifying lens. It replaces a bare pin with a larger, clearer aiming picture and lets the archer fine-tune the reticle to their eyesight and target face.

Szczegóły

A scope housing serves two jobs. It frames the target inside the peep so centring is precise, and it carries the reticle: a fibre pin, an illuminated dot, a fine ring or crosshair. Target archers choose the reticle for the target face — a ring that fits the gold, a dot for 3D — and swap them between events. Housings come in different diameters, and the diameter should match the peep aperture at the archer's eye-to-peep distance so the housing ring sits just inside the peep.

Most target scopes take a magnifying lens, typically 2× to 6×. Magnification makes the target look bigger and the pin's float more visible, which helps some archers aim harder and hurts others by exaggerating movement. Lens power is a personal choice; many start at 4× and adjust. A clarifier in the peep may be needed to keep the pin sharp through a stronger lens.

Scopes need levelling like any sight: a bubble in the housing sets the second axis, and the sight's third-axis adjustment keeps that bubble truthful on uphill and downhill shots. Because the housing is heavier than a pin guard, it also affects bow balance — a reason to re-check stabiliser setup after fitting one.

The scope is not a hunting sight. The lens fogs, gathers glare, and narrows the field of view; hunters who want magnification use a small lens in a pin housing rather than a full target scope. For 3D and indoor, though, a well-set-up scope is the difference between seeing the ten ring and guessing at it.

Powiązane w BowSmith

Słownik

Materiały

Dziennik pomiarów ustawień łuku

Najczęstsze pytania

What lens power should I start with?: 4× is a common starting point for outdoor target; indoor and 3D shooters often go lower to keep the sight picture steady. If the float looks alarming, drop power rather than fight it.
Why is my pin blurry through the lens?: Your eye can't focus on the pin and the magnified target at once. A clarifier in the peep sharpens the pin; alternatively use a dot or ring reticle that reads clearly out of focus.
Does a scope replace a peep?: No — the peep stays as the rear reference and the scope is centred inside it. Match the housing diameter to the peep so the alignment is unambiguous.