What is the difference between a riser and a bow?

The riser is one part of the bow: the rigid centre section you hold, which carries the grip, the arrow rest and the sight and stabiliser mounts. A complete bow is the riser plus two limbs and the string, and on a compound bow the cams and cables as well.

Can I put any limbs on my riser?

Only limbs with a matching fitting. Many recurve and barebow risers use the ILF fitting, so ILF limbs from different makers usually fit, but some bows use their own fitting. Match the limb length to the riser for the bow length you want, and check the draw weight before you buy.

Does riser weight matter?

It does. A heavier riser is steadier at full draw and after the shot, but more tiring to hold through a long session. Barebow archers often add weights to the riser, though under World Archery rules the bow with its weights must still pass through a 12.2 cm ring.

Majdan

The riser is the rigid centre section of a bow, the part you hold. It carries the grip, the arrow rest and the mounting points for a sight and stabilisers, and a limb attaches at each end. Recurve and barebow limbs usually slot into removable fittings on the riser; compound limbs sit in limb pockets held by limb bolts.

Szczegóły

Everything that aims the arrow is built on the riser, so it needs to stay stiff and stable while the limbs flex. Target risers are usually machined or forged aluminium, with carbon and magnesium also used; traditional bows often have wooden risers. The riser's mass helps steady the bow at full draw and after the shot, but a heavier bow is also more tiring to hold through a long round.

Many recurve and barebow risers use the ILF limb fitting, a widely shared standard, so limbs from one maker usually fit another maker's riser. The limb bolts on the riser let you adjust tiller and, within a limited range, draw weight. Target recurve risers commonly come in a few lengths, and the riser and limb lengths together set the bow's overall length.

Rulebooks define what a riser may be. Under World Archery target rules, a recurve bow consists of a handle or riser and grip with two flexible limbs, and it may not be a shoot-through design, while a compound riser may be. A barebow has to be bare apart from the arrow rest, with nothing on it that could help aiming, and the bow with any weights or other attachments must pass through a 12.2 cm ring. Check the rulebook for your division.

When you set up a new riser, check the center shot and the arrow rest alignment before anything else, and record the limb bolt positions so you can return to them. Small changes in how the limbs sit on the riser show up as changes in tiller and tune.

Powiązane w BowSmith

Słownik

Materiały

Najczęstsze pytania

What is the difference between a riser and a bow?: The riser is one part of the bow: the rigid centre section you hold, which carries the grip, the arrow rest and the sight and stabiliser mounts. A complete bow is the riser plus two limbs and the string, and on a compound bow the cams and cables as well.
Can I put any limbs on my riser?: Only limbs with a matching fitting. Many recurve and barebow risers use the ILF fitting, so ILF limbs from different makers usually fit, but some bows use their own fitting. Match the limb length to the riser for the bow length you want, and check the draw weight before you buy.
Does riser weight matter?: It does. A heavier riser is steadier at full draw and after the shot, but more tiring to hold through a long session. Barebow archers often add weights to the riser, though under World Archery rules the bow with its weights must still pass through a 12.2 cm ring.